Nine years ago we set out to become the best high speed wireless integrator and Var to Var distributor in the world. I believe we’re on the right track. If you decide to give us a try, let me know how you think we’re doing.

-Peter Schoon, Founder and Pres.

---

FastE / GigE Free-Space Optics Links. #1 experienced Link source in the world.

 

 

Picture Gallery >>

 

Virtual Site Survey Information Entry Form

 

 

SystemSupportSolutions recommends (and the majority of manufacturers require) that a Site Survey (link design project) be completed for each fixed wireless link.

As a convenience and to save travel cost for non-local sites, we now offer a "Virtual Site Survey" project alternative using the form below . All information is required, including good quality visuals and distance measurements.

You will receive the same "Site Survey and Installation Considerations" report document that is developed from an on-site visit by us.

Step 1: Request a manual for the specific link being deployed by clicking here. It will provide you with information you need to select your mount locations, and give you a good idea of what the mount hardware looks like, etc.

Step 2: Print out this form and obtain all data including visuals and an accurate link distance measurement.

Step 3: Return to this form, fill in all required information and click "Submit".

Step 4: Email or mail the visuals as instructed below.

Step 5: You will receive your "Site Survey and Installation Considerations" report document normally within 24 hours. Please review the document carefully, including specified tasks for you to complete locally prior to link deployment, and then communicate any questions and/or agreement with the plan.

Your name
Your email address
Your phone number
Date site survey was conducted
Survey performed by (Company name)
...and individual(s) present
Company name (Link owner)
Use	Data Data + Voice Data + Voice + Video
Minimum avg. availability requirement	99.9% 99.99% 99.999% 99% 98% 97% 95% 90% 100% (redundant path is planned)
Protocol	Gigabit Ethernet Ethernet Fast_Ethernet ATM Sonet FDDI T1 E1
Site A Information
Address of Site A
Street
City
State
Country
Building construction type	Cement block Unknown Concrete Brick Steel Wood Stucco finish (any underlying foam material?)
Approximate height of proposed mount location on building A	Unknown 1 story (4 meters) 2 story (8 meters) 3 story (12 meters) 4 story (16 meters) 5-15 story 16-30 story 31-50 story >51 story
Transceiver location on building	Unknown Sidewall parapet at rooftop level (preferred) Sidewall Horizontal roof mount (not recommended) Through a window, ceiling mount Through a window, sidewall mount Through a window, floor mount
Orientation	Unknown East-West North-South North East to South West North West to South East
Line of sight	Clear with absolutely no obstructions Unknown Clear, but traverses intermediate rooftops (>2m vertical clearance) Clear, but traverses intermediate rooftops (<2m vertical clearance) Clear but potential for tree top interference in future Trees need to be cut down for clear LOS Trees just need to be trimmed for LOS Clear but stack discharge may impact beam Long link / smog consideration
GPS coordinates of site A (if available)	Longitude Latitude
Link distance in meters
Vertical elevation angle of link
Power source	110 V 60 Hz AC 20A, surge-lightening-weather protected 802.3af PoE 220 V 50 Hz AC 20A, surge-lightening-weather protected 24V DC -48V DC
Host network device (what will FSO connect to?)	Switch Router Single PC IP Multiplexer for T1 Hub
Is there an appropriate open port	Yes No, Customer to install prior to deployment
If a fiber optic host interface, is it	Multi-mode FO 1310nm Multi-mode FO 850nm RJ45 Copper Port Single mode FO 1310nm Single mode FO 1550nm
Canon (and LightPointe w/Mgt.) only:
IP Address
Subnet
Default Gateway
Site B Information
Address of Site B
Street
City
State
Country
Building construction type	Cement block Unknown Concrete Brick Steel Wood Stucco finish (may have underlying foam)
Approximate height of proposed mount location on building B	Unknown 1 story (4 meters) 2 story (8 meters) 3 story (12 meters) 4 story (16 meters) 5-15 story 16-30 story 31-50 story >51 story
Transceiver location on building	Unknown Sidewall parapet at rooftop level (preferred) Sidewall Horizontal roof mount (not recommended) Through a window, ceiling mount Through a window, sidewall mount Through a window, floor mount
Orientation	Unknown East-West North-South North East to South West North West to South East
Line of sight	Clear with absolutely no obstructions Unknown Clear, but traverses intermediate rooftops (>2m vertical clearance) Clear, but traverses intermediate rooftops (<2m vertical clearance) Clear but potential for tree top interference in future Trees need to be cut down for clear LOS Trees just need to be trimmed for LOS Clear but stack discharge may impact beam Long link / smog consideration
GPS coordinates of site B (if available)	Longitude Latitude
Link distance in meters
Vertical elevation angle of link
Power source	110 V 60 Hz AC 20A, surge-lightening-weather protected 802.3af PoE 220 V 50 Hz AC 20A ded.circuit, surge-lightening-weather protected 24V DC 48V DC No power required, passive link
Host network device (what will FSO connect to?)	Switch Router IP Multiplexer for T1 Single PC Hub
Is there an appropriate open port	Yes No
If a fiber optic host interface, is it	Multi-mode FO 1310nm Multi-mode FO 850nm RJ45 Copper Single mode FO 1310nm Single Mode FO 1550nm
Canon (and LightPointe w/Mgt.) only:
IP Address
Subnet
Default Gateway
Additional Information
Who will install the transceiver mounts	System Support Solutions, Inc. Customer Contractor
Who will align, test and certify the link?	System Support Solutions, Inc. Customer Contractor
Who will provide installation of network cabling from the transceivers to the host network devices?	Customer's cabling contractor Customer Contractor System Support Solutions, Inc.
Who will provide line power installation at the rooftop transceivers?	Customer's electical contractor Customer Contractor System Support Solutions, Inc.
Visuals have been sent via	Email Regular_mail
Additional comments
Enter Code:

---

Visuals

Important! Don't skip this step. It is the most important.

The acquisition of good visuals is critical to completion of a valid "Virtual Site Survey".

This list of required visuals must be obtained by you, properly labeled, proposed equipment locations identified, and forwarded to us:

Please click here to download an MS Word document to use as a template for your visuals submission, and email to us at Peter@SystemSupportSolutions.com

Important note: please paste the visuals into the MS Word document with a description of each, and use the "arrow tool" on the "drawing tools toolbar" to insert arrows (as depicted in the samples below) to show precise proposed mount locations, etc.

Please don't skip any of the pictures. For easy reference while you are taking the pictures, here is the list of shots required:

1. Street view of Site A
2. Site A rooftop line-of-sight view looking at Site B
3. Site A Transceiver position viewed from street level
4. Site A rooftop view of mount location
5. Site A rooftop penetration location
6. Street view of Site B
7. Site B Transceiver position viewed from street level
8. Site B rooftop line-of-sight view looking at Site A
9. Site B rooftop view of mount location
10. Site B rooftop penetration location

---

Site survey images. Replace with your pictures, reposition arrows, replace text with your descriptions.

Please click here to Download this MS Word doc as your image submission template

Street view of site A

---

Site A rooftop line-of-sight view to Site B. Tree trimming / maintenance is under our control. Power lines are in background.

---

Site A Transceiver position viewed from the street.

---

Site A rooftop view of mount location.

---

Site A rooftop penetration location.

---

Street view of site B.

---

Site B transceiver position viewed from the street. Trees are trimmed below sight line.

---

Site B rooftop line-of-sight view of Site A

---

Site B rooftop view of mount location.

---

Site B rooftop penetration location.

---

This form is for the use of System Support Solutions Inc. customers only.
Please use this form for its intended use only, excessive or abusive messages will be discarded without notice.
Use of this form to send unsolicited commercial e-mail (UCE) is strictly prohibited.

asdf